Horizontal Pumps H

Horizontal centrifugal pumps “H” for large flows with a low total head. Main application pulps with lumps of a certain size.

The “H” range starts with the “H-30” model, very suitable for experimental plants, and reaches to the “H-300” model suitable for dredging sandy sea or river beds due to its size and capacity.

  • Maximum height: 26 metres.
  • Maximum flow: 1,000 m3/h.
bomba H-de-indus-agar
gráfico rendimiento H-30

Flow chart

cota alzada H

Technical drawing: Side view

cota planta h

Technical drawing: Top view

curva rendimiento h40

Flow chart

cota alzada h40

Technical drawing: Side view

cota planta h40

Technical drawing: Top view

curva rendimiento h60

Flow chart

cota alzada h60

Technical drawing: Side view

cota planta h60

Technical drawing: Top view

curva rendimiento h80

Flow chart

cota alzada h80

Technical drawing: Side view

cota planta h80

Technical drawing: Top view

curva rendimiento h100

Flow chart

cota alzada h100

Technical drawing: Side view

cota planta h100

Technical drawing: Top view

curva rendimiento h125

Flow chart

Technical drawing: Side view

Technical drawing: Top view

curva rendimiento h150

Flow chart

cota alzada H150

Technical drawing: Side view

cota planta h150

Technical drawing: Top view

curva rendimiento h200

Flow chart

cota alzada H200

Technical drawing: Side view

cota planta h200

Technical drawing: Top view

Maximum flow is estimated in 1000 m3/h of clean water at a working rate of 600/700 rpm and a required power of 250/300 HP.

Technical documentation for low-pressure horizontal pumps H

Dimensions and Flow Ratios

Flow charts

Installation systems

Instructions and maintenance

Spare parts and assembly drawing